Syringe Pumps from KD Scientific 
& CMA Microdialysis

KDS pumps - So Advanced They're Simple.

Unsurpassed Accuracy and Reliability.

The latest generation of KDS advanced microprocessor controlled syringe pump, designed especially for low, pulse-free flow rates.  Pumps are available for dispensing from 1 to 10 syringes in a variety of styles including standard infusion, infusion/withdrawal and push/pull.

New Optional Keypad Programmable Capability.

KDS 200 series pumps can now be purchased with keyboard programmable capability.  These pumps can be programmed in minutes to perform virtually any laboratory application.

Simple to Operate.

All KDS pumps have a menu-driven setup procedure visible on an alphanumeric display.  All pumps feature preset rate and volume control plus automatic shut-off.  Dispense volume is tracked and displayed continuously.   When the preset volume has been dispensed, the pump shuts-off automatically.

Easy as 1, 2, 3!

1.)    Select syringe from displayed table.

2.)    Enter Volume to be dispensed.

3.)    Enter Flow Rate and press 'Start'

It's that fast...and that simple!

External Control.

Each KDS pump employs a sophisticated microstepping motor to virtually eliminate pulsing.  Built-in TTL and RS232C interfaces allow easy external control.

Optional Accessories.

Built-in "end of dispense" audible alarm.

IBM / Mac compatible lead

Pump to pump 'daisy chaining' leads

For Syringe Pumps, Call Linton First!

If you need a pump - call us first! - we are happy to provide you with all the information you need to select the best pump for your needs, and a written quotation, and when you buy the pump(/s) you get the security of a money-back warranty to ensure your complete satisfaction.  We can also provide N.A.M.A.S. standard calibration certification on request.  Also, because we have a fully equipped engineering workshop we can provide regular service/calibration and repair services.

Back to top.

The Pumps...

Infusion Pumps

Model	KDS100	KDS101	KDS200
No. of Syringes	ONE	TWO	TWO
Syringe Size	10 ml-60 ml ea.	10 ml-10 ml ea.	10 ml - 140 ml ea.
Picture:

Model	KDS220	KDS250	KDS310
No. of Syringes	Four, Six or Ten	FOUR	ONE
Syringe Size	10 ml-140 ml ea.	10 ml-10 ml ea.	1 ml-100 ml ea
Picture:		* Model KDS250 allows each syringe to be a different size

Back to top.

Infusion / Withdrawal Pumps

Model	KDS210	KDS230
No. of Syringes	TWO	FOUR, SIX Or TEN
Syringe Size	10 ml-60 ml ea.	10 ml-140 ml ea.
Picture:

Back to top.

Push-Pull Pumps

Model	KDS120	KDS210C	KDS260
No. of Syringes	TWO	FOUR	FOUR
Syringe Size	10 ml-60 ml ea.	.10 ml-10 ml ea	10 ml-10 ml ea
Picture:

Microdialysis Pumps

Back to top.

Site by Rob Jones.
Copyright © 1999 Linton Instrumentation  . All rights reserved.
Revised: January 30, 2007.