Biopac MP100 Workstation

More Flexible!

MP100 amps.jpg (27968 bytes)

Click here for the Biopac Website

Amplifier Modules for the MP100 System.

Amplifier modules are available for most physiological applications.   Biopac amplifier modules are unique in the sense that they have no messy interconnecting wiring, for most amplifiers there is no separate power supplies.   Amplifiers are connected to the Universal Interface Module  - UIM100 (supplied with all MP100 starter systems) 'Lego' TM style - that is to say that they simply plug together, signal and power connections are made providing an easy, efficient, space saving amplifier set-up.

Biopac also produce a remote monitoring module set  - the TEL100, which consists of a base module which is attached, like any other amplifier, to the UIM100 as well as a remote 'belt-pack' which is connected to the base module by a single wire which can be up to 60Metres away from the base station.   This 'belt pack' contains four multi-purpose amplifiers with individual gain and filter settings.  Up to four TEL100s can be used simultaneously on an MP100 system.

You can connect your existing transducers to Biopac's amplifier modules using the TCIs - Transducer Connector Interface Kit.

Amplifier Modules
Interface Modules
HLT100A
High Level Transducer Module
UIM100A
Universal Interface Module
Back to top
Biopotential Amplifier Modules
ECG100B
Electrocardiogram Amplifier
EEG100B
Electroencephalogram Amplifier
EMG100B
Electromyogram Amplifier
EOG100B
Electrooculogram Amplifier
ERS100B
Evoked Response Amplifier
GSR100B
Electrodermal Activity Amplifier
Back to top
Gas Analysis Modules
CO2100A
Carbon Dioxide Measurement Module
O2100A
Oxygen Measurement Module
Back to top
Stimulator Modules
STM100A
Stimulator Module
STMISOA
Stimulus Isolation Adapter for STM100A (0-100V)
STMISOB
Stimulus Isolation Adapter for STM100A (0-200V)
STMISOC
Stimulus Isolation Adapter (Constant current and 0-200V)

Back to top

MP100 TEL100.jpg (12366 bytes)

TEL100 Remote Monitoring Module Set
TEL100 System
SS SERIES
SS Series Electrodes and Transducers for TEL100
TEL CBL107
Connection Cable
TEL100
Remote Monitoring Module Set
TEL100D
Four-Channel Receiver Module
TEL100M
Four-Channel Portable Transmitter
Back to top
Transducer Amplifiers
DA100B
General Purpose Transducer Amplifier
LDF100A
Laser Doppler Flow module
NIBP100
Non-Invasive Blood Pressure Amplifier
OXY100A
Pulse Oximeter Module
PPG100B
Photoplethysmogram Amplifier
RSP100B
Respiration Pneumogram Amplifier
SKT100B
Skin Temperature Amplifier

Back to top

mp100 TCI.jpg (10683 bytes)

TCI - Transducer Connector Interface Kits
Transducer Connector Interfaces
TCI100
TCI for Grass/Astromed (6 pin)
TCI101
TCI for Beckman (5 pin)
TCI102
TCI for WPI (8 pin)
TCI103
TCI for Lafayette (9 pin)
TCI104
TCI for Honeywell (6 pin)
TCI105
TCI for Modular Phone Jack (4 pin)
TCI106
TCI for Beckman (12 pin)
TCI107
TCI for Nihon Kohden (5 pin)
TCI108
TCI for Narco (7 pin)
TCI109
TCI for Fukuda (8 pin)
TCI110
TCI for Gould (12 pin)
TCIKIT
Transducer Connector Kit

Back to top

click_to_enquire.gif (6203 bytes)

Please contact us for a free MP100 colour catalogue.

Site by Rob Jones.
Copyright © 1999 Linton Instrumentation  . All rights reserved.
Revised: October 30, 2002.

MP100 small v.gif (10977 bytes)