|
|
MM1 & MM3
Micropositioners
|
MM1 and MM3 (Shown with pencil to illustrate size)
MM-1 and MM-3 Micropositioners
These unique micropositioners are precision instruments designed to
eliminate many research and design problems at a justifiable cost,
especially in the case of space limitations. The MM-3 is roughly
1 3/4 inches (4.4cm) in height and less than 1 inch (2.5cm) in width and
depth. The MM-1 is even smaller at a height of only 1 inch
(2.5cm).
The black anodized aluminum body is made with a one piece base and
three piece construction. The spring-loaded stages move on stainless
steel tracks for smooth motion and precision; maximum wobble and
straightness on the MM-1 and MM-3 is less than 1um and 2um
respectively. Both models are available in single, double, or triple
stages for X, Y, and Z axes; adding stages is an easy job and requires
no special tools or adaptors. The travel of the stages is 1/2in (3mm)
for the MM-1 and 1/2in (13mm) for the MM-3. The base is
easily adapted to most surfaces.
Back to top
Specifications
| MM-1 |
| Dimensions |
0.20in x 0.44in x 1.03in
5mm x 11mm x 26mm |
| Travel |
1/8in
3mm |
| Straightness |
less than 1um |
| Wobble |
less than 1um |
| Screw adjustments |
64 TPI |
| Thermal stability |
40deg F to 25 deg F |
Back to top
| MM-3 |
| Dimensions |
0.28in x 0.66in x 1.75in
7mm x 17mm x 44mm |
| Travel |
1/2in
13mm |
| Straightness |
less than 2um |
| Wobble |
less than 2um |
| Screw adjustments |
40 TPI |
| Thermal stability |
50deg F to 200deg F |
Back to top
Site by Rob Jones.
Copyright © 1999 Linton Instrumentation . All rights reserved.
Revised: August 11, 2000
. |
|