You are here:   Products
  |  Login

Categories

Minimize

All Products

Enquiry List

Minimize

Your Enquiry List is empty

Products

Minimize
OUTISO

Biopac OUTISO - Output Isolation Adapter

These analog signal isolators are used to connect mains powered external laboratory equipment to the MP System when the system also connects to electrodes attached to humans.
Code
OUTISO

Biopac OUTISO - Output Isolation Adapter

These analog signal isolators are used to connect mains powered external laboratory equipment to the MP System when the system also connects to electrodes attached to humans. Use the INISO to connect external equipment outputs to MP analog input channels. Use the OUTISO to connect MP analog signal outputs (amplifier and D/A) to external equipment inputs. Each signal isolator comes with an RJ11 cable for connection to the HLT100C module.

  • For digital (TTL compatible) isolation to the MP digital I/O ports, use the STP100 optical interface.
  • If the MP System does not electrically connect to human subjects, signal connections to external equipment can be made through the UIM100C module and the respective analog or digital connection cable.

The OUTISO plugs directly into any of the 16 signal output channels, plus the two D/A outputs, on the HLT100C module and incorporates a 3.5mm phone jack for signal output connections. The OUTISO is very useful when the biopotential amplifier output signal requires routing to external laboratory equipment while being sampled by the MP System. Select the appropriate analog connection cable to connect to your external equipment's input.

OUTISO - Output Isolation Adapter Specifications:

Isolator Type: Analog
Bandwidth: DC to 50kHz
Input/Output Range: ±10 volts
Input Resistance: 200 KOhm
Output Resistance: 120 Ohm
Output Current: ±5mA
Offset Voltage: ±20mV (nominal)
Temperature Drift: 200 µV/°C (nominal)
Noise: 2.5mV (rms)
Isolation Voltage: 1500 VDC
Isolation Capacitance: 30pF
Output Connector: 3.5mm mono phone jack
Weight: 50 grams
Dimensions: 2.6cm (high) x 2.6cm (wide) x 7.6cm (long)
Included Cable: 2.1 meter (straight thru, M/M, 6 pin, RJ11)
Interface: HLT100C