You are here:   Products
  |  Login

Categories

Minimize

All Products

Enquiry List

Minimize

Your Enquiry List is empty

Products

Minimize
fp891b Controller
fp895b Controller

Scisense Pressure Catheter Controllers

Scisense Pressure Catheter Controllers for single and dual sensor pressure catheters.
Code
FP891B FP895B

Scisense Pressure Catheter Controllers

These catheters are available in both re-useable and disposable type. The model number is different for a pressure catheter that connects to the admittance based ADVantageTM System, please contact us for any further inquiries.

Pressure Control Unit - FP891B

 

The Scisense FP891B pressure control unit is a single-input signal conditioner and amplifier for use with our solid-state pressure sensors. The FP891B has a sensitivity of 2.2 V/100 mmHg (or 0.022V/mmHg) eliminating the need for any additional amplifiers or signal conditioners. Calibration and zero balance controls are conveniently. located on a 15 degree angle for easy user access.

Dual Pressure Control Unit - FP895B

The Scisense FP895B dual pressure-control unit can be used with either 2 single sensor pressure catheters recording simultaneously or with a dual-pressure sensor catheter. The sensitivity for each input is 2.2V/100 mmHg (or 0.022V/mmHg) eliminating the need for any additional amplifiers or signal conditioners. Calibration and zero balance controls are conveniently located on a 15 degree angle for easy user access.

Specifications:

Number of Inputs:  FP891B = 1 (9 pin Redel); FP895B = 2 (9 pin Redel)
Pressure Output:  2.3 Volt/100 mmHg
Power Supply Out:  +5VDC, +/- 12 VDC
Power Supply In:  100-250 Vac, 50-60 Hz
Dimensions:  
FP891B
H : 6.6 cm (2.6")
W : 11.7 cm (4.6")
L : 15.4 cm (6.0")  
FP895B
H : 6.9 cm (2.7")
W : 22.6 cm (8.9")
L : 16.8 cm (6.6")
Calibration Controls:  0 mmHg (-2.86V) and 100 mmHg (-0.57V)
Catheter Cable:  122 cm (48”) cable
Output Connector:  BNC
Signal Gain:  1143

Ordering Information:

All Pressure Control Units require a cable pack, as follows:

    * FP891B requires cable package FC-SP-PK, which includes: AULT Power Supply (FS-AULT301), Power Cord, (1) Scisense Catheter Cable (FC-1394-4), and (1) BNC-BNC Cable (FC-BNC-6)
    * FP895B requires cable package FC-DP-PK, which includes: AULT Power Supply (FS-AULT301), Power Cord, (2) Scisense Catheter Cables (FC-1394-4), and (2) BNC-BNC Cable (FC-BNC-6)

Accessorize your purchase with these related items

Single and Dual Sensor Pressure Tipped Catheters
Single and Dual Sensor Pressure Tipped Catheters
$0.00
ADVantage Admittance PV (Pressure Volume) Systems
ADVantage Admittance PV (Pressure Volume) Systems
$0.00