You are here:   Products
  |  Login

Categories

Minimize

All Products

Enquiry List

Minimize

Your Enquiry List is empty

Products

Minimize
O2 CO2

Biopac O2100C - Oxygen Measurement Amplifier Module

The O2100C module records quickly varying oxygen concentration levels. This fast-response analyzer is ideal for monitoring time-averaged O2 levels using mixing chambers or real-time O2 levels for breath-by-breath measurements.
Code
O2100C

Biopac O2100C - Oxygen Measurement Amplifier Module

The O2100C module records quickly varying oxygen concentration levels. This fast-response analyzer is ideal for monitoring time-averaged O2 levels using mixing chambers or real-time O2 levels for breath-by-breath measurements.
 
The O2100C module interfaces (via the AFT20 gas sampling interface kit) with the AFT15A and AFT15B mixing chambers, the AFT21 and AFT22 non-rebreathing T valves, or the AFT25 mask with integral non-rebreathing T valve.
 
The O2100C module is equipped with a variable speed pump to adjust the flow over a wide range of sampling conditions. The module employs an analysis technique based on the parametric oxygen measurement principle. Sampling line connections for input and output flow are readily accessible on the front panel of the module.
 
The O2100C uses Servomex, Inc. technology for O2 concentration signal processing.

Applications Include:

  • Exercise Physiology
  • Magnetic Resonance Imaging - MRI Compatible
  • Pulmonary Function

O2100C - Oxygen Measurement Amplifier Module Specifications:

Range: 0-100% O2
Repeatability: ±0.1% O2
Resolution: ±0.1% O2
Linearity: ±0.2% O2
Zero Stability: ±0.01% O2 /hr
Response Time: 160 msec (T10-T90) @200 ml/min
  500 msec (T10-T90) @ 100ml/min*
  1000 msec (T10-T90) @ 50 ml/min
Gain: 10, 20, 50, 100 (%O2/Volt)
Output Range: 0-10 volts
 
Flow Range: 50-200 ml/min (50-150 ml/min recommended)
Temp Range: 5-50°C
Zero Drift: ±0.05% O2/°C
Span Drift: ±0.25% O2/°C
Sampling Port: Male Luer
Weight: 990 grams
Dimensions: 7cm (wide)x 11cm (deep) x 19cm (high)
Power Source: 12 VDC @ 1 amp (uses AC100A transformer (included))
   
Delay: With Delay in Sec and Flow in ml/min:
Flow (ml/min) = 240/Delay (sec)
Example:
Delay = 2 sec
Flow = 120 ml/min

Module measures the partial pressure of O2 and thus the module output is proportional to the pressure in the sample cell. Gas sampled must be free of any liquid or condensable vapors. Gas should be filtered to 5 microns or better.
*Factory Preset