You are here:   Products
  |  Login

Categories

Minimize

All Products

Enquiry List

Minimize

Your Enquiry List is empty

Products

Minimize
INISO

Biopac INISO - Input Isolation Adapter

These analog signal isolators are used to connect mains powered external laboratory equipment to the MP System when the system also connects to electrodes attached to humans. This insures subject isolation from other mains powered devices is maintained.
Code
INISO

Biopac INISO - Input Isolation Adapter

These analog signal isolators are used to connect mains powered external laboratory equipment to the MP System when the system also connects to electrodes attached to humans. Use the INISO to connect external equipment outputs to MP analog input channels. Use the OUTISO to connect MP analog signal outputs (amplifier and D/A) to external equipment inputs. Each signal isolator comes with an RJ11 cable for connection to the HLT100C module.

  • For digital (TTL compatible) isolation to the MP digital I/O ports, use the STP100 optical interface.
  • If the MP System does not electrically connect to human subjects, signal connections to external equipment can be made through the UIM100C module and the respective analog or digital connection cable.

The INISO plugs directly into any of the 16 input channels on the HLT100C module and incorporates a 3.5mm phone jack for signal input connections. Select the appropriate analog connection cable to connect to your external equipment's output.

Applications Include:

  • Interfacing external amplifiers and analog signals

INISO - Specifications:

Isolator Type: Analog
Bandwidth: DC to 50kHz
Input/Output Range: ±10 volts
Input Resistance: 200 KOhm
Output Resistance: 120 Ohm
Output Current: ±5mA
Offset Voltage: ±20mV (nominal)
Temperature Drift: 200 µV/°C (nominal)
Noise: 2.5mV (rms)
Isolation Voltage: 1500 VDC
Isolation Capacitance: 30pF
Input Connector: 3.5mm mono phone jack
Weight: 50 grams
Dimensions: 2.6cm (high) x 2.6cm (wide) x 7.6cm (long)
Included Cable: 2.1 meter (straight thru, M/M, 6 pin, RJ11)
Interface: HLT100C