You are here:   Products
  |  Login

Categories

Minimize

All Products

Enquiry List

Minimize

Your Enquiry List is empty

Products

Minimize

KDS Legato 100 Infuse Only Syringe Pump

Infuse only single syringe pump. Accommodates syringes from 0.5ul to 60ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.
Code
LEGATO 100

KDS Legato 100 Infuse Only Syringe Pump

Infuse only single syringe pump. Accommodates syringes from 0.5ul to 60ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.

Features:

  • Holds one syringe from 0.5ul to 60ml
  • Stall detection
  • High resolution color touch screen
  • Unparalleled ease of use
  • Password protected touch display
  • Run LED light on front panel
  • Full metal chassis
  • Built in syringe table
  • Up to 30 lbs/13kg linear force
  • Advanced microstepping techniques
  • Built in RS485 interface
  • USB port
  • I/O & TTL interface
  • Continuous mode of operation
  • Spill dam
KDS Legato-100 Specifications
Accuracy: ± 0.5%
Reproducibility ± 0.05%
Syringes (Min/Max) 0.5 ul to 60ml
Flow Rate: Minimum (0.5 ul syringe): 1.28 pl/min
Maximum (10ml syringe): 25.99 ml/min
Maximum (60ml syringe): 88.28 ml/min
Display 4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile Memory Stores all Settings
Connectors: RS485 - IEEE-1394 6 pos
USB - Type B
I/O & TTL - 15 pin D-Sub Connector
Linear Force (Max) 13.6 kg (30 lbs) @ 100% Force Selection
Drive Motor 0.9 Stepper Motor
Motor Drive Control Microprocessor with 1/16 microstepping
Number of Microsteps
per one rev.of Lead Screw
15,360
Step Revolution 0.069 um/step
Step Rate - Minimum 27.5 sec/ustep
Step Rate - Maximum 26 usec/ustep
Pusher Travel Rate - Minimum 0.15 um/min
Pusher Travel Rate - Maximum 159 mm/min
Power 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)
Weight 2.66 kg (5.9 lbs)
Operating Temperature

4 degree C to 40 degree C
(40 degree F to 104 degree F)

Storage Temperature

-10 degree C to 70 degree C
(14 degree F to 158 degree F)

Humidity 20% to 80% RH non condensing
Mode of Operation Continuous
Classification Class 1
Pollution Degree 1
Installation Category 11
Regulatory Certification CE, UL, CSA, CB Scheme, EU RoHS