|
|
 CMA
402 Microdialysis Syringe
|
CMA/402
Two (Independent) Syringe Microdialysis Infusion Pump
- Dual Syringes – independently
controlled
- flow-rates
from 0.1- 20 µL/min
- Flow directions – individual
infuse or withdraw
- Microdialysis
CAD software included
The CMA 402 Syringe Pump
is a compact, flexible dual syringe pump designed for low pulse-free
flow rates, suitable for microdialysis and other low flow experiments.
Start/stop and flow rate can be set independently for each syringe. The
flow direction can be easily reversed individually for the syringes.
The pump is pre-calibrated for 1, 2.5 or 5 mL syringes with flow rates
between 0.1 μL/min and 20 μL/min. The flush feature is used
for preparatory work to fast feed the syringe.
With Microdialysis CAD software, included with the CMA 402 Syringe Pump,
experiments can be planned and controlled in endless variations.
The pump is available in two different versions, one of which includes
all the accessories to enable easy and safe work with the microdialysis
probes: two syringes, two probe clips, two vial holders and a bracket
for easy attachment to the pump. The
pump can also be ordered without the accessories. The Microdialysis CAD
Software is included in both versions.
Back to top
ORDERING INFORMATION
| Ref.
No. |
CMA
402 Syringe Pump with Accessory kit |
| 800
3100 |
Includes:
Microsyringes 1 mL, 2pcs
Vial holders 2 pcs
CMA/11-12 Clip
CMA/10 Clip
Micro T
Microdialysis CAD Software |
| Ref.No. |
CMA
402 Syringe Pump |
| 800
3110 |
Includes:
Microdialysis CAD Software |
Accessories
Accessories
|
|
| 830
9020 |
Microsyringe
1 mL (glass) |
| 830
9021 |
Microsyringe
2.5 mL (glass) |
| 830
9022 |
Microsyringe
5 mL (glass) |
| 743 1083 |
Syringe Needle, 5/pkg |
| 340
8300 |
Syringe
clip, small |
| 340
8310 |
Syringe
clip, medium |
| P000043 |
Micro
T *(see below) |
| 340 9501 |
FEP Tubing 1 m |
| 840 9501 |
FEP Tubing 10 x 1 m |
| 340 9500 |
Tubing Adapters |
*Micro T
The Micro T is a three
way connector. Connected to the syringes in the CMA 402
Syringe Pump and a microdialysis probe, two different
perfusion fluids can be changed, even gradually, without
introducing air bubbles into the system. With the Micro T
and the CAD program there are a lot of possibilities.
|
|
|
Back to top
Site by Rob Jones.
Copyright © 1999 Linton Instrumentation . All rights reserved.
Revised: January 30, 2007
. |
|
