|
|
|
CMA/130 in vitro Stand
|
CMA/130 in vitro Stand
- lengthens
probe life
- simplifies
calibrations, recovery tests
- facilitates
safe storage of probes
The CMA/130 In Vitro Stand is
used for storage and during testing of microdialysis probes. Each probe
should be carefully washed before and after implantation and tested for
in vitro recovery. The stand includes three holders for 1.5 mL Eppendorf
tubes and three probe clips. There are three types of clips: The
CMA/11or 12 Clip, which holds the flat body of the CMA/11 or CMA/12
Probes or their Guide Cannulae, the CMA/10 Clip, which holds the shaft
of the CMA/10 or CMA/12 Probe, and the CMA/7 Clip which holds the body
of a CMA/7 Probe or Guide Cannula.
The CMA/130 can be supplied with four combinations of
clips. The clips can also be mounted in a stereotaxic instrument.
ORDERING INFORMATION
Ref. No.
|
Description
|
830 9101
|
CMA/130 In Vitro Stand with 3
clips for CMA/10
|
830 9102
|
CMA/130 In Vitro Stand with 3
clips for CMA/11 and CMA/12
|
830 9103
|
CMA/130 In Vitro Stand with 2
clips for CMA/10, 1 for CMA/11 and 1 for CMA/12
|
830 9104
|
CMA/130 In Vitro Stand with 3
clips for CMA/7
|
CMA/130 In Vitro
Stand includes:
|
Stand, In Vitro Holder 3
pcs, 3 probe clips, Stereotaxic Adaptor, Connecting Rod for Clip
and
Eppendorf tubes 1.5 mL 25 pcs
|
|
|
|
P000136
|
CMA/7 Clip
|
830 9003
|
CMA/10 Clip
|
830 9013
|
CMA/11+12 Clip
|
830 9005
|
Stereotaxic Adapter
|
830 9004
|
Connecting Rod for Clip
|
Probe Clips
| Ref. No.
830 9101 |
 |
| Ref. No.
830 9102 |
 |
| Ref. No.
830 9103 |
 |
| Ref. No.
830 9104 |
 |
Back to top
Site by Rob Jones.
Copyright © 1999 Linton Instrumentation . All rights reserved.
Revised: January 30, 2007
. |
|