CMA Microdialysis Probes

CMA/11

CMA/11 Microdialysis Probe (left) and Guide Cannula (right)

CMA/11 Microdialysis Probe

• small diameter
• high spatial resolution
• minimal tissue damage
• low internal volume

The CMA/11 Microdialysis Probe possesses greater spatial resolution and causes less tissue damage due to its reduced size. The probe has a Cuprophane membrane with an outside diameter of 0.24 mm. The outer steel shaft diameter is 0.38 mm. The inner cannula is constructed of fused silica coated with polyimid (3 and 4 mm membrane) or polyimid tubing (1 or 2 mm membrane). The inlet/outlet capillaries are mounted in a white plastic body matched to the size of a corresponding guide cannula. Once implanted, the probe sits tightly in the guide cannula´s capsule without the need for screwing or cementing. FEP tubing is connected to the probe using tubing adaptors.

The CMA/11 Microdialysis Probes are guaranteed for single use, however, with proper care, they may be reused several times. Complete instructions are included in each package.

Back to top

ORDERING INFORMATION

Back to top

Site by Rob Jones.
Copyright © 1999 Linton Instrumentation  . All rights reserved.
Revised: January 30, 2007 .